Engineered for Extremes:

The Future of High-Purity Fluoroplastics

Whether you need the melt-processable excellence of PFA, the cryogenic stability of PCTFE, or the mechanical strength of PVDF,

JEKIN delivers uncompromised performance for your most demanding applications.

PFA

Known as the melt-processable upgrade to PTFE, PFA offers nearly identical chemical resistance and thermal stability. It stands out for its high-purity properties and ease of processing, making it the most premium option in the family.

PVDF

A versatile all-rounder that provides an excellent balance between cost-efficiency and mechanical strength. It is easy to process and highly durable for industrial use, though its thermal resistance is lower than other advanced fluoropolymers.

PCTFE

A specialized cryogenic polymer renowned for its exceptional gas barrier properties and high rigidity. It maintains stability in extreme cold environments but is restricted by a lower maximum service temperature compared to PFA or PTFE.

PTFE

The “king” of plastics, featuring unmatched chemical inertness, low friction, and extreme thermal limits. Its non-melt requirements make it more challenging to manufacture than standard melt-processable thermoplastics.

Basic Definitions & Structural Comparison

PropertyPFAPVDFPCTFEPTFE
Full NamePerfluoroalkoxy AlkanePolyvinylidene FluoridePolychlorotrifluoroethylenePolytetrafluoroethylene
Fluorine Content (wt%)~76% (Perfluorinated)~59% (Partially Fluorinated)~49% (Contains Chlorine)~76% (Perfluorinated)
Fully FluorinatedYesNoNoYes
CrystallinitySemi-crystalline (Medium)Semi-crystalline (Medium-High)Semi-crystalline (High)Semi-crystalline (High)
AppearanceTranslucent/TransparentOpaque/TranslucentTransparent/TranslucentOpaque White

Performance Characteristics Comparison

PropertyPFAPVDFPCTFEPTFERanking (High→Low)
Continuous Service Temp-200 to +260°C-40 to +150°C-240 to +150°C-200 to +260°CPTFE = PFA > PCTFE ≈ PVDF
Short-term Max Temp~300°C~175°C~180-200°C~300°CPTFE = PFA
Melting Point~305°C~170-177°C~210-220°C~327°CPTFE > PFA > PCTFE > PVDF
Chemical ResistanceExtreme (High Purity)Excellent (Weaker vs polar solvents)Excellent (Slightly below perfluoro)Extreme (Almost all chemicals)PTFE ≈ PFA > PCTFE > PVDF
Friction Coefficient0.05-0.080.2-0.4~0.35Lowest 0.03-0.05PTFE >> PFA > PVDF > PCTFE
Mechanical Strength (Tensile)25-35 MPa (Tough)45-60 MPa (Strongest)30-40 MPa (Rigid)20-35 MPa (Soft)PVDF > PCTFE > PFA ≈ PTFE
Rigidity/Creep ResistanceMedium (Better than PTFE)ExcellentExcellentPoor (Cold flow prone)PCTFE ≈ PVDF > PFA > PTFE
Gas/Vapor BarrierExcellent (Better than PTFE)MediumExtreme (Lowest permeability)GeneralPCTFE >> PFA > PVDF > PTFE
ProcessabilityGood (Melt Injection/Extrusion)Best (Injection/Extrusion/Coating)Medium (Melt, but narrow window)Worst (Sintering/Machining only)PVDF > PFA > PCTFE > PTFE
TransparencyTranslucent/High TransparentTranslucentHigh TransparencyOpaquePCTFE > PFA > PVDF > PTFE
UV/Weather ResistanceExcellentGreat (30 years outdoor)AverageExcellentPVDF > PTFE ≈ PFA > PCTFE
Insulation/High FrequencyExcellentGood (Higher dielectric constant)ExcellentExcellent (Lowest dielectric)PTFE ≈ PFA > PCTFE > PVDF

Application Scenario Comparison

MaterialCore AdvantagesTypical Application ExamplesMarket Positioning (2026)
PTFEExtreme temp resistance + Ultra-low friction + Chemical inertnessNon-stick coatings, seals, bearings, chemical linings, wire insulation, medical catheters, aerospace componentsThe Universal King (Highest volume)
PFAHigh purity + High temp + Melt processable + Complex shapesSemiconductor ultra-pure piping/valves/tanks, wet etching equipment, pharmaceutical high-purity pipes, high-temp cablesPremium Choice for Semi/Chem (Fastest growth)
PCTFEUltra-low gas permeability + High rigidity + Cryogenic sealingCryogenic valve seals (LNG/LOX/H2), aerospace O-rings, moisture-proof blister packaging, vacuum windowsCryogenic / Aerospace / Pharma packaging niche
PVDFHigh strength + Easy processing + Weather resistance + Cost-effectiveLi-ion battery binders/separator coatings, water treatment membranes, fluorocarbon coatings, chemical piping, solar backsheetsMainstay for New Energy/Water Treatment (Value King)

Quick Material Selection Decision Form

(One-Sentence Summary)

Your Core NeedsPreferred MaterialBrief Reason
Max temp + Lowest friction + Extreme chemical inertnessPTFEThe "Universal King," but difficult to process
High temp + High purity + Complex shapes + WeldablePFAThe "Purity + Processing" dual king for Semi/Pharma
Extreme gas barrier + Cryogenic rigidity + Dimensional stabilityPCTFEThe "Barrier King" for Cryogenic/LNG/Aerospace sealing
High mechanical strength + Easy processing + Weather resistance + Best valuePVDFThe "Balance King" for Batteries/Membranes/Coatings/Water treatment
Limited budget but requires excellent chemical resistancePTFE/PVDFPVDF is easier to process; PTFE is more resistant to extremes
Repeated sterilization or ultra-high purityPFACombines both purity and temperature resistance

Discuss Your Polymer Solution Needs

Ready for your next project? Complete the form to consult with our technical team. 

Official logo of Jekin Polymer - A leading provider of high-performance engineering plastics and polymer solutions

WE ARE HERE TO HELP YOU

Discuss Your Polymer Solution Needs

Are you looking for top-quality polymer solutions tailored to your needs?

Reach out to us.

Form / Shape
Please include dimensions, quantity, drawing availability, operating temperature, chemical exposure or application details.